DSE

The DSE7320/20 is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, genset applications. 

Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs, remote PC and via SMS text alerts (with external modem).

The DSE7410/20 Series Modules are compatible with electronic (CAN) and non-electronic (magnetic pickup/alternator sensing) engines and offers a comprehensive number of flexible inputs, outputs and
extensive engine protections so the system can be easily adapted to meet the most demanding industry paralleling requirements.

The modules can be easily configured using the DSE Configuration Suite Software.
Selected front panel editing is also available.

The DSE8620 is an Auto Mains (Utility) Failure Control Module suitable for paralleling single gensets (diesel or gas) with the mains (utility) supply. Designed to synchronise a single genset with a single mains (utility) supply, the DSE8620 will automatically control the change over from mains (utility) to generator supply or run the generator in synchronisation with the mains (utility) to provide no-break, peak lopping and peak shaving power solutions.

The module can indicate operational status and fault conditions on the LCD screen (multiple languages available), by illuminated LED, audible sounder and SMS messaging.

Comprehensive communications are also available via RS232, RS485 & Ethernet for remote PC control and monitoring, and integration into building management systems. The comprehensive event log will record up to 250 events to facilitate maintenance.

The DSE8760 is an easy-to-use single or multi-mains controller with automatic transfer switch capability. Designed to synchronise single or multiple DSE8x10s and DSE8680s with single or multiple mains (utility) supplies, the DSE8760 will automatically control the change over from mains (utility) to generator supply or run generators in synchronisation with the mains (utility) to provide no-break, peak lopping and peak shaving power solutions.

The modules are designed to work with independent front display screens which are connected via a data link up to a maximum distance of 1 km. These must be ordered as a separate item.

The module can indicate operational status and fault conditions on the LCD screen (multiple languages available), by illuminated LED, audible sounder and SMS messaging.

Comprehensive communications are also available via RS232, RS485 & Ethernet for remote PC control and monitoring, and integration into building management systems.
The comprehensive event log will record up to 250 events to facilitate maintenance.

The DSE8710 is an easy to use Synchronising Auto Start Control Module suitable for use in a
multi-generator loadshare system, designed to synchronise up to 32 generators including electronic and non-electronic engines.

The DSE8710 monitors the generator and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault condition.

The modules are designed to work with independent front display screens which are connected via a data link up to a maximum distance of 1 km. These must be ordered as a separate item.

System alarms are annunciated on the LCD screen (multiple language options available), illuminated LED and audible sounder.­­

The event log will record 250 events to facilitate easy maintenance. An extensive number of fixed and flexible monitoring, metering and protection features are included
as well as comprehensive communication and system expansion options.

The DSE8610 is an easy to use Synchronising Auto Start Control Module suitable for use in a multi-generator loadshare system, designed to synchronise up to 32 generators including electronic and non-electronic engines.
The DSE8610 monitors the generator and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault condition.
System alarms are annunciated on the LCD screen (multiple language options available), illuminated LED and audible sounder.­­

The DSE 7450 is a control module designed to control DC generators in supplying both a load and/or the charging of batteries in a remote standalone application.

Specific attention has been given to ensure this module has the necessary features to be configured for many different and challenging applications. Owing to the large number of monitoring points and the built in programmable logic controller, a wide number of operating modes can be realised.  This provides the user with the ultimate flexibility in the engine control of the generator to ensure battery life optimisation, reduce engine maintenance/ replacement and fuel usage.

Application specific needs can also be achieved by combining the standard and embedded safety features for generator control and the configurable discrete I/O.

The DSE 8003 Remote Overview Display module is designed for use with modules from the DSE86xx, DSE87xx and DSE88xx range of Load Share Control modules*, giving a choice of display options suitable for a wide variety of applications. One (1) display overview module is connected to multiple compatible modules via a data communication link up to a maximum distance of 1.2 km on RS485.

This display module offers comprehensive large screen graphs, charts, metering, trend analysis, power display and engine status information in a clear image and text format.
User selectable display ‘widgets’ allow customisation of the lower part of the 10” screen.

The DSE 8003 Remote Overview Display module is designed for use with the DSE86xx, DSE87xx and DSE88xx Load Share Control modules, giving a choice of display options suitable for a wide variety of applications. One (1) display overview module can be connected to multiple compatible modules via a data communication link up to a maximum distance of 1.2 km on RS485.

The DSEWebNet Gateway is used in conjunction with supported DSE controllers to provide monitoring and communications data via the DSEWebNet® advanced communications system.
The DSEWebNet Gateway communicates to the connected DSE controller(s), monitoring the instrumentation and operating state. When this data changes, the new data is logged in the internal memory. At regular intervals the logged data is transmitted to the DSE host server.

The DSE host server is then integrated into the DSEWebNet® which can be accessed via an internet connected device and web browser to allow remote monitoring and control of multiple DSE controllers around the globe. GSM, GPS and GSM/GPS antenna’s are available as accessories.

The DSE2548 is an LED expansion module that can be used with all DSENet® compatible control
modules. The module has been designed to display a maximum of eight individual LED indications up
to a maximum distance of 1 KM (0.6miles).

The DSE2520 display module is designed to work with the DSE7320 Auto Mains Failure Control Module.  Up to three display modules can be connected to one host control module, and can be positioned up to a maximum distance of 1km away.
The remote display offers exactly the same instrumentation, control and monitoring capabilities as the host control module, including starting and stopping of the engine.

The DSE2510 display module is designed to work with the DSE7310 Auto Start Control Module.  Up to three display modules can be connected to one host control module, and can be positioned up to a maximum distance of 1km away.
The remote display offers exactly the same instrumentation, control and monitoring capabilities as the host control module, including starting and stopping of the engine.

The DSE2157 is an output relay expansion module for use with DSENet® compatible control modules. The DSE2157 has been designed to extend a host module’s output capabilities.

A maximum of 10 DSE2157’s can be connected to an individual module at any one time. All outputs
are configurable via the host controller.

The additional output capabilities of the DSE2157 give OEMs the flexibility to meet increasingly complex industry specifications.  The module incorporates ‘DIN’ rail and chassis mountings allowing convenient fixing into a panel.

The DSE2133 Input Expansion Module is used in conjunction with supported DSENet controllers to provide 8 additional inputs.  Up to four modules can be linked together to provide up to 32 additions inputs.  The inputs can be configured as RTD or Thermocouple inputs in the ‘host controller’.

The DSE2152 Analogue Output Expansion Module is used in conjunction with supported DSENet controllers to provide 6 additional outputs. The outputs can be individually configured as 0 – 10 V or 4 – 20 mA, via the ‘host controller’.

LED indication is provided for ‘Power On’ and ‘Link Lost’

The DSE2152 is designed to be mounted within a control panel, either on the panel DIN rail utilising the integral mounts, or chassis mounted, utilising the mounting holes.